Polymer pipes for wells

Casing pipes are intended for the construction of water wells, as well as technological wells. Drilling wells using casing avoids contamination of groundwater and increases drilling speed due to reduced diameters compared with conventional steel pipes.

obsadnije trubi

Benefits polymer casing for wells:

  • Hygienic;
  • Lifetime of more than 50 years;
  • Corrosion resistance;
  • Chemical resistance
  • Low weight combined with high mechanical strength;
  • Absolute reliability and integrity of the threaded connection;
  • Low installation costs.

Our company is engaged not only in sales, but also producing its own casings for wells. However, our pipes are unique for the Ukrainian market, as made of copolymers of propylene, which are much better in comparison with PVC pipes for wells for mechanical and environmental properties especially.

Polypropylene is resistant to defy corrosion cracking, hard, chemically resistant , waterproof strong polymer that thanks to these qualities was chosen by Brovary - Plastic Ltd for the production of pipes for water wells and pipe filters to them.

Pipes for water wells are produced by continuous extrusion followed by mechanical cutting external and internal threads on the ends. Filters are made on the polypropylene frame (tube) the size of structure and filter layer, depending on the characteristics of the aquifer soils. Filters provide a long and steady job well, protecting it from the muddy sand. The filter material has high mechanical strength and is not subject to corrosion.

The pipes are produced commercially from the block copolymer of propylene; in nominal diameters from 110 mm to 160 mm Construction length from 1.0 m to 5.0 m Other pipe manufacture construction is allowed as long as it is agreed with the customer.

Pipes have three dimensional series (type):

Type Maximum level of hydrodynamic type Mounting Depth
R8 25 m 60 m
R10 40 m 100 m

Pipes for water wells for water supply for domestic and drinking purposes are to enter into the state sanitary - epidemiological expertise. The compositions used in the manufacture of pipes have sanitary - epidemiological conclusions by sanitary examination and permission from the Ministry of Health of Ukraine.

The requirements for the pipe surface, physical and mechanical properties are controlled by the measuring laboratory of Brovary - Plastic Ltd. The laboratory also carries out periodic pipe acceptance test.

 

Contacts

tel: +38(044) 451-70-98
tel: +38(044) 592-07-73
tel: +38(044) 229-15-78
_____________________
tel fax:
+38(04595)7-25-65
tel fax:
+38(04595)7-26-44